be Quiet! fan push pin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tested working with Silent Wings 3. The shape is not a clone of the original, but a more practical shape for FDM
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 879
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a push pin that works with be Quiet! fans, at least the Silent Wings 3 model.
More accurately, the push pin can be used with the rubber bumpers that came with the fans. The shape of the push pin is not a direct clone of the original, but a more practical shape for FDM printing. The suggested printing orientation on an FDM printer is horizontally with the flat side of the push pin end facing down. Use supports.
There are two 3MF files included, one with dimensions roughly equivalent to the original part, another with a thicker end in case you have lost the 1.65mm rubber spacer that came with the original push pins.
The part has been printed in PLA and then tested and determined functional on a Silent Wings 3 fan.
Designed using OpenSCAD version 2021.01.
Please, always take the necessary safety precautions when messing around with electronics. It's best to leave repairs to professionals, particularly if you have to open a device to do repairs.