Andonstar AD407/AD409 Microscope Extension (and maybe other models)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The AD409 has too much magnification. This model extends the camera distance to give more overview when soldering.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 618
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
This mount extends the maximum camera distance of the Andonstar AD407/AD409 microscope camera for more overview when soldering. The minimum distance (=maximum magnification) can still (almost) be reached by lowering the arm to the closest distance. The focus ring is accessible through the tower window.
Printed with PLA and 20% infill. No supports needed.
Depending on your printer precision you might need to rasp down the baseplate tooth a little bit for perfect fitting.
Two M4x25 screws, rings and nuts are needed for mounting.
A little rubber band between the microscope and the top of the extension tower can increase friction if the display starts moving when focussing.
Freecad model and .stl attached. Have fun!
Please write a comment if it fits for other microscope models, too.
Might be unstable. Use at your own risk!