Webcam Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nice and simple two-axis wall mount for old Logitech webcams for use with octoprint.
- Ocena
- 4,8 / 5
- Polubienia
- 144
- Pobrania
- 667
- Wydruki
- 5
- Wyświetlenia
- 4549
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Nice and simple two-axis wall mount for old Logitech webcams for use with octoprint. 3M screws and 3m nuts are used to assemble the wall mount. It's screwed with standard 3,5mm wood screws to the wall.
The camera plate is designed to be edited for your needs. The 3M screws are placed 25mm apart from each other, so feel free to remix that part for your need and upload it.
The included camera mount is designed to fit directly into the webcam part and is therefore thought to replace the original monitor mount. The original mount can be removed by pulling it out of the camera module.
Print instructions
The camera plate should be printed with 100% infill and at least 0.1 layer height.
If you use the available .3mf that should already be configured.