Action cam adapter Black Diamond Vapor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an GoPro compatible action cam adapter for the Black Diamond Vapor climbing helmet
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 52
- Wydruki
- 1
- Wyświetlenia
- 722
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- GNU General Public License v2.0
UPDATE April 2025
The model was improved with a 3D scan of the helmet interface. The new model has a much better fit than the old one. The rest of the geometry was not changed, still GoPro compatible
----------------------------------------------------------------------------------------------------------------
This is an GoPro compatible action cam adapter for the Black Diamond Vapor climbing helmet. It is intended to be taped to the helmet with a double sided outdoor tape like known from the original GoPro or action cam mounts. The two holes face the helmets back. They are meant for additional fixation of the mount to the helmet using a thin cord. Should the tape fail the action cam is still attached to the helmet and does not get lost.
I recommend to print the part from an (outdoor-) durable material like ASA that is also rather on the flexible side. Prusament PC Blend works fine too. PLA parts broke on me in the past so I would not recommend that. The G-code and 3mf-project-file below are generated for ASA, but you can easily change that to whatever material you prefer. Printing the part upright guarantees the best fit and least amount of support material.
I am curious, show me your makes!