351 modeli
Vaporesso XROS 3 Series Drip Tip This is a remix of a model made by CHAOSXSPIRIT that can be found here. I have changed the drip tips design by making it smaller so it prints faster, is more comfortable, and uses less filament. I have…
High poly version - https://social.thangs.com/m/220439 Category: Toy & Game Accessories
Original part : https://www.myminifactory.com/object/3d-print-vaporeon-pokemon-120325
More design on: https://www.patreon.com/c/mortex3d PATREON: Mortex.3d INSTAGRAM: Mortex.3d
Big Eeveelution fan? Looking for the whole set of 9 models? Find the rest of them over on my Patreon ! Or Show your support by buying me a coffee ! So which eeveelution is your favorite? I personally think Jolteon, but that's just because…
A large, solid stand for the STORZ & BICKEL Mighty+ vaporizer. Flared towards the bottom for stability. Around 54g when printed with 100% and around 35 with 20% infill . You may have to scale it to 100.5% - 101% in your slicer for an…
Another take at a working tip replacement for a Vaporesso XROS series pod. Printed as is, tip down, and with a brim. Might need post processing to smooth sharp corners. (Fixed this on the current version v4) Lemme know if this works for…
Inspired by Parkzone and Eflite's Vapor, decided to design a smaller Vapor with a wingspan of 25cm as my first 3d printed RC plane project. It does not take long to print and build this as it is a simple design. This is version 1 and it…
Low Poly Vaporeon model by r0ck3tman93 I printed with the following settings: 0.16mm layer height 3 walls 20% infill tree supports: placement everywhere 40° overhang angle bed temp 50° -0.1mm first layer horizontal expansion Give it a…
This is an ashtray I made to use with my Arizer Extreme Q vaporizer. The holes can fit a ton of different tools, but I use mine to hold things like a 510 battery, some extra pokers and a brush, and a lighter. Also included is a rolling…
Soccer Boots - Nike Style Mercurial Vapor. This is the original design of Mercurial Vapor but without Nike logo.
Vapor blasting is perfect for precise cleaning of aluminium parts without damaging the surface! Designed to work with 220l / 58 gallon barrels with outer diameter +- 590 mm / 23 inches, I chose plastic for its corrosion resistance. Parts…
For Vaporesso XROS Standard and Mini. Same pod. Just chuck it at your printer and go. Got no time for it. Maybe will polish it up a bit later.
A 2-in-1 device. Allows you to fill the chamber of your vaporizer with the funnel, and/or press a strong and dense pellet. Normally, due to the low density, a small amount of 0,10 g would totally overfill the chamber, leading to muted…
If you download the model, please don't forget to leave a like. Thank you! <3 Dive into the elegant world of Vaporeon with this low poly geometric 3D print. The design captures the aquatic Pokémon's graceful and fluid nature with sharp,…
English I made this model for my Vaporesso LUXE XR MAX there is a slot to slide the usb C cable inside, for the cable I used a usb C fast charge from Xiaomi (it is possible that it is a little bigger than the ordinary ones) you can pass…
This is a smaller and cheaper replacement for the original filling system, see https://storz-bickel.com/en-us/filling-set-for-40-dosing-capsules I recomment to iron the upside of the hole-plate. 2023-08-25 Update: Fixed “Druckplatte.stl”…
toothbrush cup with movable evaporating bottom; protects the brushes from standing in water and blackening; holds 5 toothbrushes and two toothpastes comfortably, buttom square 6 x 6 cm, upper square 7 x 7 cm, height 10 cm;
This model is a sleeve/case designed for the Vaporesso XROS 3 Mini vape. There are openings for airflow, charging port and LED. Printed on my Ender 3 V2 with 0.28 Layer height and 0.5mm line width. Tollerance is thight but works for me.
Tatooine Moisture Vaporator
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Turns a pickle jar into a filtering water diffuser for hookah or vaporizers. It attempts to split air bubbles up as much as possible to accomplish better diffusion than many other options I have seen. A gasket printed in TPU will likely…
A simple stand for the STORZ & BICKEL Mighty+ vaporizer. Slightly flared towards the bottom for increased stability. Includes a rather large cut-out for the USB-C port to accommodate even the thickest plugs. Available in single-direction…
Zum befüllen der Dosierkapsel wird der Trichter drüber gestülpt. Keine Stützstruktur nötig. Bei Bedarf den Trichter innen mit feinem Schleifpapier schleifen. The funnel is placed over the dosing capsule to fill it. No support structure…
Have Fun EDIT: Added a v2 with tighter tolerances. Category: Organization
Have fun! UPDATE: Added version 3. Would recommend to print this version. Print Settings Printer: I3 Mega Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% Category: Replacement Parts
Vapor-lock resistant funnels feature three outer channels that release air during pouring, stopping splashback and flow.
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
These are cups designed to test the properties of polymer plastic films. I use it to test the moisture barrier performance of biofilms. The cups are filled with either water (or dessicant), and the sample loaded in between the gaskets and…
This is a vaporesso cap for pods MTL and RDL. I have the two models (RDL AND MTL) and it works great in both but in RDL is more tight. I printed in TPU and PLA (the images are in TPU) and it looks great in both, but in tpu filament it's…
Please comment, rate, and post a make! This is a case and dock for the Vaporesso Xros 3 vape. The case is friction fit and will need a little encouragement the first time you slip it on. The dock has a hole for inserting the USB cable…
Replacement vaporizer head for NE-C28P, 3D design thanks to Mervin
GIF since the photo doesn't do it justice: https://gfycat.com/accuratejointbronco I designed this great-looking low-poly coaster to demonstrate how you can use PrusaSlicer's built-in features to turn a solid object into something amazing.…
il primo driptip per la sigaretta kiwi fatto dalla DYNAMICS
This is a Hueforge STL of an Eevee/Vaporeon Evolution I found on the internet that I liked. I take no ownership claims of the artwork itself. I just ran it through Hueforge to get the STL and instructions. Print at 100% infill with a…
This is a 7 piece set that includes the Main body, 5 adapters, and a Vestratto Anvil Vaporizer. It is for display only and completely non functional. Makes for a great desk piece. I printed it solid in resin, you could certainly try…
the pods have dimensions of 10mm outside and 8 mm inside so maybe others fit too
This is a jar for five capsules of the Wolkenkraft Äris (Ultra) or FX Mini. The capsules are ⌀ 10mm and 12mm in hight. The jar itself measures ⌀ 40mm x 22mm height. You may also like this for the Norddampf Relict .
An evaporation gasket for the filling area of a slim zippo. Printed in Eono Black TPU at 0.2mm on Prusa Mini +
Please comment, rate, and post a make! Be sure to check out my other models! A relatively simple case for the Vaporesso XROS Pro vape. Having used this brand for an extended period of time, I know that the USB port can get worn…
140x140x25 mm spikes made for a vapor smoothing PvB prints in a round jar Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .02 Infill: 10 Filament: Prusament PLA Gravity Gray Category: 3D Printer…
created after losing the original
DRZ400 mount for Trail Tech Vapor and OEM light bar. Uses factory mounting bracket and hardware. you will need a couple screws, washers, and nuts to mount the Vapor mount to the factory bracket. You'll also need to use your big brain to…
DEUTSCH: Das ist eine Docking Station, ein Kapselaufbewahrerhalter und eine Befüll Station für die Dosierkapseln für den Norddampf Relict Vaporizer entwickelt. Die Befüll Station kann jedoch mit jeder Dosierkapsel mit dem Durchmesser von…
drip tip di varie varie dimensioni, sia come foro interno, si come diametro esterno
Have Fun! Print Settings Printer: I3 Mega Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% Category: Replacement Parts
Present for a friend but I thought others might like it too. its a clone of the fenix mini vaporizer i think.
For best results, use either a darker silk PLA or a marble PLA I used Extrudr Dark Metallic Gray PETG This is based off another model (which is the photo i used since i was too impatient to wait for the other to print), i cant find it…
Introducing our "Glaceon Keychain" – a must-have for Pokémon Trainers and dedicated Eevee enthusiasts! This intricately designed keychain goes beyond mere accessory, making a bold statement reflecting your passion for the enigmatic…
This is a little box for herb storage, made to fit inside the Pax Vaporizer case from this link: https://www.printables.com/model/705119-pax-23mini-vape-charger-case-combo-storage But you can always print and use it however you like, as a…
Version 2, Sun Dec 20 2024 Replacement shell for repair of Storz-Bickel Mighty vaporizer. USE AT YOUR OWN RISK Please watch the temperature, do some research before choosing the right material & use. Please share your experience! Hope you…
Halter für E- Zigarette. Kiwi Vapor Halter für Akku + Pen + Coil --------------------------------------------------------------------------- E- Zigarette stand. Kiwi vapor stand for powerbank, pen and coil. Printed in PLA 15% Infill
When chilling to some music or bashing the laptop keyboard I like to make a quick swap of an empty pod for a full one. Here are simple stands to hold a Vaporesso Xros 3 or Xros Pro with slots for two spare pods, designed in Tinkercad. I…
This is a vapor filter for the exhaust port of common vacuum pumps. It appears to reduce expelled oil vapor by > 95%. Its been a huge help at reducing a little noise and migration of oil into the shop environment. This was designed to fit…
This basic roman column container measures 34.8 mm x 40 mm and is 56 mm high. You can use it as a stand to add importance to any small object, as a container, or as the start for a miniature Vaporwave party. The lid and the bottom of the…
Hierauf könnt ihr den Inhalt des Grinders schütten und dann in den Vaporizer füllen. Es stehen zwei verschiedene Größen zur Verfügung. Bei Bedarf könnt ihr die inneren Flächen mit feinem Schleifpapier glätten. You can pour the contents of…
This nozzle can be used with the Novritsch Anti-Fog unit (using 9mm tubing) and Wiley X glasses using comm temples. Comm temples can be recognized by their thin layout, suitable for use with over ear headset. The nozzle inlet is oriented…
Printed in Geeetech TPU 95A. Using PLA or PETG might be a little too snug. The hole fits a necklace cord with a maximum diameter of 3mm. The cord I used has a 2mm diameter, but the part that connects the necklace together is 3mm, so I…
Pokemon stickers Wall full printing with k1 param : Default 10mm but move -5 mm to Z axe 0.16mm Standard@K1 No Support Print to 56min
Designed to work with Vaporesso Xros Series Devices, should work with XROS 1, 2, and 3, Mini or Non-Mini, etc… Has holes for magnets and can be stacked on top of other organizers but not underneath them. I have not included the ‘XROS’…
Źródło oznaczyło ten model jako treść 18+.
This "Hood"/Bracket allows you to evenly disperse foaming evaporator coil cleaner when replacing cabin air filters in the Tesla Model 3. Remix of https://www.thingiverse.com/thing:4861123 inspired by:…
Here I have constructed a box to neatly store up to four pods of the Vaporesso Luxe X2 e-cigarette. There is a recess for a 3 x 1.7 mm neodymium in each compartment. This means the pods are tightened a little and don't fall out of the box…
Store a Vaporesso using Gridfinity 1x1 Grid. Modified model to store two 10ml bottles of liquid on a Gridfinit here .
This is a jar for five capsules of the Norddampf Relict. The capsules are ⌀ 11mm and 12.5mm in hight. The jar itself measures ⌀ 51mm x 28mm height. You may also like this for the Wolkenkraft Äris Ultra .
A box for holding Vaporesso pods. Place for 4 Pods. Use filament for hinge Updated with better tollerances.
simple quick'n'dirty and thin funnel against those crumbs. use vase mode. diameter of funnel end is 14,6mm. super simple design, no rocket science, uploaded this only for the lazy. it's not very sturdy, but can be reprinted easily.
Little clip stand addon for the Plenty vaporizer by Storz & Bickel. Just clip one or two of them under the Plenty and it won't fall over anymore. Have fun! Print Settings Printer: I3 Mega Rafts: Doesn't Matter Supports: Doesn't Matter…
Vaporesso XROS mini holder to hang around nek. Prints in 40 min. Use PLA. You just need your own keyring and lanyard. You can charge it while in the holder.
Tried to create a humidifier similar in design to humidifiers from Philips, but cheaper and with the function of collecting dust from the air The idea is that the computer fan blows dusty air through the side holes through a wet filter…
Vapor Smoothing Plate A Baseplate for Vapor Smoothing. It stops your prints from adhering to the underlying surface. In a usual scenario, the print being smoothed may have solvent condense or drip onto the underside, gluing the print to…
My first attempt at creating a Cura theme as I wasn't digging the any of the stock themes for Cura 5. Inspired by HughMann's Cura 4 Vaporwave theme. Instructions for install: Download the 3x .svg and 1x .json files. Create a folder called…
casing socket adapted for geprc vapor O5/D5
Geometric Vaporeon Pokémon
140x140x25 mm spikes made for a vapor smoothing PvB prints in a round jar Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.3 Filament: Prusament PLA Gravity gray Category: 3D Printer Accessories
Mercedes Part A 201-727-02-87 This a printable replacement part of the door panel clip for the vapor barrier behind the door panels of various Mercedes models such as the Mercedes W201 (190, 190E) as well as the W124 (E-Class) . Would…
Palm trees and endless roads what else would you like? Inspired by the vaporwave aesthetic
Replacement Nose Coen for the Estes Vapor Model Rocket
I got tired of constantly flipping the multi-tool around to have the vaporizer stand while I was prepping it. This prep tray allows you to keep things organized. It could also be used as a stand during use if you have the water pipe…
My simple version of a vaporator like the ones found at Lars homestead. Only parts that need supports are the out bits. There are 3 variations of section 3 that can be printed. Section 4 can only be used if option 1 was used for section…
A simple support screwed on the corner of the desk to maximize its space
A handy funnel to help load Arizer ExtremeQ dry herb vaporizers or other bowls.
A spike to save your battery from head on collisions. I printed with Sainsmart TPU, 60% cubic infill, 4 perimeters, and a 100% infill modifier box covering the bottom five mm for extra strength at the base.
Just a simple funnel for a dry herb vaporizer with a build in stomper. It's designed fot the Yocan Hit but maybe it will fit others, too.
Stand for Vaporesso Gen200 S for charging, cleaning etc. It simply falls too easy so i wanted it to have a good standing ;) Halterung für Vap. Gen 200 S um Verdampferdeck zu warten etc. Das Ding fällt einfach zu leicht um und darum wollte…
Use this badge to label any storage / transport cases you use for your Storz & Bickel Volcano. It has a recess of 1mm on the back, so any double-sided tape with a thickness of 1.1mm (like 3M VHB 5952) will work very well. I used an SVG of…
A caddy that holds up to three Vaporesso Luxe X or Luxe XR pods.
A quick model that I made for storing all the parts that I personally use regularly with herb vaping. This stores the bowls and the various stems for using the provided bags. It also stores the little stirring pick and the remote control.…
A keycap Version of the V a p o r w a v e Icon Helios. Fits Cherry MX style Keyboards Vaporwave is dead long live vaporwave! Do you understand its all in your head? I could not get it to print properly standing up- Make sure you print…
A tray to aid filling of Tinymight 2 dosing capsules, sized for the official capsules. A flat area is included to lay the prepared herb, and then a number of holes for the empty capsules to be added. It might be worth printing out the…
2x1 Gridfinity Holder for the STORZ-BICKEL Crafty Vaporizer based on the expandable storage by Zack Freedman. This model was created using the start part from Zach Freedman and then designed to hold the Crafty, the included brush, and a…
PLA 7,5 % Infill 0.2mm height no support
Simple protective case for Vaporesso GTX One Although it is not necessary, I advise printing the case with a brim.
I bought recently the GEN 80S vape from Vaporesso. Very happy with the shopping but I got two problems: The drip get dirty when you put in the pocket and can leak some liquid so I wanted to create a tap to transport without worries. The…
You obviously need a magnet for this, the hole on the provided model should fit a 1.5mm high 4.5mm diameter magnet. If you use the second provided STL you can print it without supports, just make sure your first layer has the adhesion it…
![Herb Box for Pax Vaporizer Case [Check Description for the Case Link]](https://media.printables.com/media/prints/705919/images/5538669_7055d50e-be23-4379-96a0-053a71de9784_400f7731-c4be-42be-80da-203238f3f178/img_7357.jpg)
