1 / 1
Dust filter cover for 3M mask, remix for use with FFP2 material — zdjęcie 1

Dust filter cover for 3M mask, remix for use with FFP2 material

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

It is the same as the hex version of Dust filter cover for 3M mask by vyrobca…

Ocena
5 / 5
Polubienia
27
Pobrania
150
Wydruki
1
Wyświetlenia
790
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

It is the same as the hex version of Dust filter cover for 3M mask by vyrobca (https://www.thingiverse.com/thing:3982639) but shortened. In the foto you see the original design. I had to cut off part of the rim, because it would collide with the 3M 7502 mask. I am using it with this https://www.thingiverse.com/thing:4215903 or better the remix https://www.printables.com/model/358166-3m-603-filter-adapter-to-use-ffp2-masks (support is easier to remove).

Print Settings

Rafts:

No

Supports: 

No

Resolution:

0,2

Infill: 

15%

Filament: no PLA

 

 

Category: Parts

Tagi