1 / 2
GoPro Dual Charger Wall Mount For Hero 11,10,9 — zdjęcie 1
1 / 2

GoPro Dual Charger Wall Mount For Hero 11,10,9

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount your GoPro Dual Charger on the wall and get it off the floor! Specially designed for 3M Velcro.

Ocena
0 / 5
Polubienia
2
Pobrania
14
Wydruki
0
Wyświetlenia
212
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial

You will need 3M Velcro for this print, but other 3M products may work too, maybe even try double sided tape!

At the top of the print there is a overhang that may be hard to achieve with printers that have poor cooling, you can add supports if you want it to look good, but functionally it will work (unless your printer has very poor part cooling).

To install the Dual Charger into the print, don't insert it from the top, slide it in and then push down.

Tagi