1 / 3
Secure Apple AirTag holder for your bike
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The rear saddle screw is used to securely (with screw lock) mount your AirTag tracker.
- Ocena
- 5 / 5
- Polubienia
- 90
- Pobrania
- 207
- Wydruki
- 1
- Wyświetlenia
- 4087
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (101)Powiązane
This AirTag mount was designed with security in mind to withstand attempts of removal.
Combined with screw locks you will have a ridgid, light and secure tracking solution for your beloved bike.
UPDATE:
- added cover designed for ruthex m2 threaded inserts
You will need
- 4x M2 bolts (or ruthex m2 threaded insert)
- 4x M2 screws (> 8mm long)
- 1x AirTag
Print settings:
- works fine with a standard 0.4 noozle and 0.2mm layer hight
- up to 100% infill to increase strength
- can be printed without supports (upright position)
- use at least PETG for long lasting outdoor use
How to achieve high rigidity:
- use more strength filaments like the polyamide with carbon fibre
- or check out the strength test from Stefan from CNC Kitchen (starting at 11:41)
Options:
- print in black so the holder is not easy to detect
- print the cover in red if you want to mimic a backlight
In case you want to disable the AirTag speaker check out the following videos or just search on YouTube. Please have in mind that following any of these descriptions will break the warranty and is on you own risk.