Lian-Li PC-V2000 Drive bay conversion to fan holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
convert the 7 optical drive bay covers into fan holders that match the external aesthetics of the case.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 603
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Convert the 7 optical drive bay covers into fan holders that match the external aesthetics of the case for the Lian-Li PC-V2000 Server Case (very old model, I'm a big fan of it).
Some of the drive bays have a couple of notches sticking out on my case and i had to cut a small notch in my models after the print. Be aware of this if you print it.
I split this into 2 parts, one bottom one goes on top as it is too tall to print on my Ender 3.
i printed this in 34 hrs with a 0.4mm nozzle with 0.2mm layer height.
The main body of the parts are 2mm thick and the part where the fan is attached is 3mm. reason is,
- 1 to remove flexibility in the wings where the nipples need to go into the notches in the case
- 2 so that screws have more room for threads (or use M3 bolts and nuts like i did, depends on your fans)
This design fits a standard 120mm fan per section.