1 / 5
Lian-Li PC-V2000 Drive bay conversion to fan holders — image 1
1 / 5

Lian-Li PC-V2000 Drive bay conversion to fan holders

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

convert the 7 optical drive bay covers into fan holders that match the external aesthetics of the case.

Rating
0 / 5
Likes
7
Downloads
71
Makes
0
Views
603
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Convert the 7 optical drive bay covers into fan holders that match the external aesthetics of the case for the Lian-Li PC-V2000 Server Case (very old model, I'm a big fan of it).


Some of the drive bays have a couple of notches sticking out on my case and i had to cut a small notch in my models after the print. Be aware of this if you print it.


I split this into 2 parts, one bottom one goes on top as it is too tall to print on my Ender 3.
i printed this in 34 hrs with a 0.4mm nozzle with 0.2mm layer height. 

The main body of the parts are 2mm thick and the part where the fan is attached is 3mm. reason is,

  • 1 to remove flexibility in the wings where the nipples need to go into the notches in the case
  • 2 so that screws have more room for threads (or use M3 bolts and nuts like i did, depends on your fans)

This design fits a standard 120mm fan per section. 

Tags