Prusa MK3S Filament Filter with Camera Cable Management
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed from https://www.thingiverse.com/thing:3433713 After adding an endoscope mount to the side of MK3S…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 567
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Remixed from https://www.thingiverse.com/thing:3433713
After adding an endoscope mount to the side of MK3S (https://www.thingiverse.com/thing:3829076) I found I had a new challenge for cable management. I ended up using zip ties to run the cable up the back of the extruder motor Which worked pretty nicely. I then found the cable needed some rigidity and direction-handling to ensure it wouldn't bend back toward the frame after a long stretch at max range.
Changes
- Added camera cable support
- moved the filter door to the opposite side of the tower
Print instructions
Category: 3D Printer Parts Summary
After adding an endoscope mount to the side of MK3S (https://www.thingiverse.com/thing:3829076) I found I had a new challenge for cable management. I ended up using zip ties to run the cable up the back of the extruder motor Which worked pretty nicely. I then found the cable needed some rigidity and direction-handling to ensure it wouldn't bend back toward the frame after a long stretch at max range.
Changes
- Added camera cable support
- moved the filter door to the opposite side of the tower
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: Yes
Resolution: .20
Infill: 20%
Filament: Prusament PETG Transparent Violet