Prusa MK3S Filament Filter with Camera Cable Management
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed from https://www.thingiverse.com/thing:3433713 After adding an endoscope mount to the side of MK3S…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 34
- Makes
- 0
- Views
- 566
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
Remixed from https://www.thingiverse.com/thing:3433713
After adding an endoscope mount to the side of MK3S (https://www.thingiverse.com/thing:3829076) I found I had a new challenge for cable management. I ended up using zip ties to run the cable up the back of the extruder motor Which worked pretty nicely. I then found the cable needed some rigidity and direction-handling to ensure it wouldn't bend back toward the frame after a long stretch at max range.
Changes
- Added camera cable support
- moved the filter door to the opposite side of the tower
Print instructions
Category: 3D Printer Parts Summary
After adding an endoscope mount to the side of MK3S (https://www.thingiverse.com/thing:3829076) I found I had a new challenge for cable management. I ended up using zip ties to run the cable up the back of the extruder motor Which worked pretty nicely. I then found the cable needed some rigidity and direction-handling to ensure it wouldn't bend back toward the frame after a long stretch at max range.
Changes
- Added camera cable support
- moved the filter door to the opposite side of the tower
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: Yes
Resolution: .20
Infill: 20%
Filament: Prusament PETG Transparent Violet