1 / 6
Dark Holocron base
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Also, I found the switching on too uncomfortable.
Therefore I designed an extra base for the Holocron, with an insert for several LEDs, a magnetic switch (from an old coffee machine) and a 9 volt battery.
The part "Tetrahedron" is glued to "Base", "Frame" is glued into "Base_upper_part".
There are 2 inserts for the LEDs, but you can also design your own suitable one. The diameter is 23,8mm. But I did not glue this insert, it should be printed "press fit".
I drilled a small hole in the holocron itself and glued in a magnet.
The magnet switch can also be omitted.