1 / 6
Dark Holocron base
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
Also, I found the switching on too uncomfortable.
Therefore I designed an extra base for the Holocron, with an insert for several LEDs, a magnetic switch (from an old coffee machine) and a 9 volt battery.
The part "Tetrahedron" is glued to "Base", "Frame" is glued into "Base_upper_part".
There are 2 inserts for the LEDs, but you can also design your own suitable one. The diameter is 23,8mm. But I did not glue this insert, it should be printed "press fit".
I drilled a small hole in the holocron itself and glued in a magnet.
The magnet switch can also be omitted.