1 / 3
Makita RT700 series (65mm) mount for the MPCNC Primo
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This can be a tight fit, rotate so you can get to the collet lock if you do not use two wrenches.
- Ocena
- 4,889 / 5
- Polubienia
- 139
- Pobrania
- 2275
- Wydruki
- 16
- Wyświetlenia
- 11 174
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 16) (Komentarze: 29)Remiksy (2)Kolekcje (230)Powiązane
This can be a tight fit, rotate so you can get to the collet lock if you do not use two wrenches. The tool also needs to be angled either direction so the corner of the top housing does not hit the bolt heads.
No calculator offset needed, makes use of the entire build area.
Print instructions
35-35% infill