205 modeli
Mostly Printed CNC Primo Version MPCNC "F" 25mm Version Released on 7/23/20 Questions are best asked here, https://forum.v1engineering.com/ 8/15/20 - Truck V1 (& Mirrored Truck) - added 1mm thickness to stepper mount. 8/16/20 - Error in…
Mostly Printed CNC Primo Version MPCNC "J" 25.4mm Version Released on 6/22/20 Questions are best asked here, https://forum.v1engineering.com/ 8/15/20 - Truck V1 (& Mirrored Truck) - added 1mm thickness to stepper mount. 8/16/20 - Error in…
*FIXED FEET ISSUE* El Primo is always in the spotlight and that's right where he wants to be! There's no audience he can't win over, except maybe his fellow performers...
Mostly Printed CNC Primo Version MPCNC "C" 23.5mm Version Released on 8/29/20 Questions are best asked here, https://forum.v1e.com/ Print instructions https://docs.v1e.com/mpcnc/PParts/
This can be a tight fit, rotate so you can get to the collet lock if you do not use two wrenches. The tool also needs to be angled either direction so the corner of the top housing does not hit the bolt heads. No calculator offset needed,…
Drag chain mount for MPCNC Primo, remixed from thing https://www.thingiverse.com/thing:4613811 . I chose to attach the drag chains directly to the Nema17 steppers with a design that straps around the motor and kept in tension with a…
Compliant mount for 11-12mm Drag Knives, and/or 11mm-50mm Pens and markers.
Generic tool mount for most 52mm spindles. Print instructions 45% infill is probably more than enough, 2+ perimeters (1mm+ walls) Fits the MPCNC Primo version only. https://www.v1engineering.com/
Basic mount. On the top mount the word "UP" should be mounted so it can be read properly. The clamps have a rounded corner side and a chamfered side, they match the mount part. You will need to rotate the spindle lock to make the mount…
This drag chain support for the MPCNC Primo replaces the regular Truck Clamp. It is for the 25mm version (F) and is suitable for a 30 x 15 mm aluminium strip which can be found at your local hardware store in 1m lengths. (at least here in…
This is a wall mount for the Fujitsu Esprimo Q920 mini PC (USFF). It consists of a base and an optional mirrored top part; the base is working fine without it, but I felt more comfortable also adding the top. Make sure that the vent holes…
Updated to the last revision. I included STEP files as well as STL files. This should allow for those with alternate dust collection hoses, mounts, routers, etc to modify to fit their individual needs. ________ The dust collection/holder…
This is a 43mm spindle mount - based on AMB 1050 FME-1. (including an adapted NutTrap and Drill Guide) All is fitted for the MPCNC Primo 25mm version! ( https://www.prusaprinters.org/prints/37292-mostly-printed-cnc-primo-f-25mm-mpcnc )…
Info added here if needed.
Made by request DM me through Printables to make a request yourself
Should fit most 55mm spindles with 57mm collars. MPCNC Primo version only. https://www.v1engineering.com/
3.5" HDD rail designed for Fujitsu Esprimo P-series computers. If you want to use it to slide your HDD, you'll need to print 2 pieces of this model. Bracket is designed in a way that you can use standard screws for HDD to mount it. It…
Total length 110 cm . This model is made from scratch with some differences agains in-game model. First of all the blade is thinner and guard is not as bulky. This means I had to modify the handle. It's squared and tapered towards the…
NOTE: For Primo “C” only (23.5mm OD conduit) . Would probably be easy to adapt to the other variants, but I haven't tried. As part of an overhaul of my MPCNC, I was able to get super cheap HGR15 linear rails from Vevor, and designed…
Picture settings are applied in the 3mf file using 4 colors in the bambulabs ams
You will need two M2x10 self-tapping screws to mount the endstop (for sourcing you can take a look at the Voron 0.1 BOM https://vorondesign.com/sourcing_guide?model=V0.1 ), the existing M3 screws of the lead screw nut can be reused.…
for 20x10mm Drag Chain
Some spare HDD mounting rails compatible with Q510, Q520, Q910 and Q920 of the Fujitsu ESPRIMO Q-Series which are commonly available here or here . Spare part number: C26361-K1011-C40-*-Y369 Print without support in PETG or ASA at 0.2mm…
MPCNC Primo F 25mm Holder for dragchain / Halter für Schleppkette M3 threadinserts and screws are required. M3Gewindeeinsätze sowie Schrauben werden benötigt.
primo pump to american maid bottle
We’re excited to introduce PRIMO v1.1 , the new anthropomorphic robotic arm developed by Crea Robotics, a division of Crea3D PRIMO is more than just a robotic arm — it’s a hands-on project designed for makers, students, and robotics…
Für meinen Esprimo D756 als Einbaurahmen für eine 2,5" SSD. Vielleicht passt Es auch für andere Rechner. Viel Spaß beim Drucken! Print Settings Printer Brand: Anycubic Printer: Vyper Rafts: Doesn't Matter Supports: No Resolution: 0,28…
Cover for 5.25 slot in Fujitsu mini tower Esprimo D756 I printed the cover in PETG. The flexibility helps with installation.
mpcnc-primo-f-tubing-plug.stl - plugs into the ends of side rails (needs 8) mpcnc-primo-f-tubing-plug-hole.stl - allows to lay cables through if you put your cable through gantry rails (needs 4) Keep your fingers safe (or do not buy the…
This is a stand I designed for the Esprimo Q556 tiny PC from Fujitsu. I've had a few clients get these machines ex-lease and they often don't come with their 'foot' this is designed to be fitted on without any screws or mounting hardware.…
MPCNC Primo 25mm (Type F) squaring helper This helps you on getting your MPCNC Primo squared. You will need a folding rule, I used a Wiha Longlife 37067 made out of composite plastic. You have to adjust the .step that your folding rule…
Wasn't a fan of what I was finding online for a cable chain on the Z-axis of the MPCNC Primo. Decided to design my own and it works great. This is for the J-25.4MM Version. Hardware needed for this: 8 x M3x5x4 Voron spec heatset inserts…
Remix/Mod of standard MPCNC feet for aluminium profile 4040 (Item, Bosch, ...) Mount with two M8 screws. .stp for remixes is also available - feel free to modify :) Screws, Nuts etc. are also included - take dimensions from there. The…
I realy liked Tims Lenovo Rack mount and I was really glad he also uploaded the step file for it. I adapted it for the Fujitsu mini PC lineup (Futro / Esprimo G). The Keystone holes are at exactly the same place as the original Lenovo…
You'll notice that the original tool mounting plates are no longer necessary as they are already integrated into the holder. You can utilize the original screws to attach the holder, although you may need a ratchet for the job. One thing…
This group of parts implements Cable Management Drag Chains on V1 Engineering MPCNC Primo model. Drag Chains for all three axises are supported. The following hardware is used: 5ea M3x12 Counter Sunk Flat Head machine screws and lock nuts…
Ich wollte an beiden Enden der Verfahrweges einen Endstop haben. Nachdem ich nichts passendes für meine Endschalter gefunden habe, habe ich die Original-Endstop-Schelle modifiziert. Der Endschalter wird auf dem Rohr befestigt und direkt…
Ich habe das Modell einmal getestet und es hat funktioniert. Probiert es gerne aus und gebt mir Feedback ob man etwas verändern sollte o.ä. Auch falls ihr andere Montagearten benötigt Gedruckt mit nobufil ABSx 40% Infill 0,2mm Layerhöhe…
Primo bottled water is a great option for water at a campground without potable water, especially in combination with a pump. The water container is big, robust and easy to carry. Primo White Water Cooler Pump (at Lowes) I wanted to be…
Drag chain side mount. Suitable for 30 x 15 mm aluminium strip. I use M4x20 Screws.
This was meant to cover the whole of the side wall of my aquarium, but it had to fit in my Core One. So I made it half the size. I recommend that you print 4 of these and tie them with fishing line. Use PETG. There is space for generous…
Fits really well, includes an access hole to adjust laser unit position. Use the screw holes in the back to secure the sprung aluminium mount they give you and mount onto the rear portion of the MPCNC Primo 57mm spindle holder The reason…
As a part of MPCNC Z-Axis assembly, you have to drill in holes for nut traps and ultimately tool holder assembly. I did not have a reliable way of holding the tube still while drilling, so I came up with this - you can screw it somewhere…
This is a remix of these endstops for 25mm OD conduit. Requires 2 x M4 20mm bolt + (lock)nut. I used ABS dark blue for the print, 0.2 mm layer height with 50% infill.
Als ich die Mpcnc in Betrieb genommen habe , war klar das ich dringend eine Absaugung brauch. Ich begab mich online auf der Suche und habe mir dieses Modell ausgesucht: https://www.thingiverse.com/thing:5239310 doch als ich die ersten…
I am currently building a MPCNC Primo using 3/4in EMT conduit which is the C-23.5mm version on the @ V1 Engineering site. You can find more info about the MPCNC at https://docs.v1engineering.com/mpcnc/intro/, and the files are available…
Cararol, primo hermano de Gary, el amigo de Bob esponja. Hecho en fusión, con forma, sin grandes pretensiones. Un pequeño caracol de adorno.., para ubicar en el jardín, el acuario o entre las macetas.., O incluso un Huerto urbano… Todo…
Take your favorite Brawl Stars character El Primo with you wherever you go with this fun and stylish keychain! Designed for fans of the game, this 3D-printed accessory features an iconic look that captures the essence of the character in…
Since the table I built my MPCNC Primo on was a very tight fit I needed a different place to mount the cable chain on. I took the existing feet and designed a snap fit holder around it which is enough to support an aluminum angle…
I designed this thing to add a z-max switch to my MPCNC Primo. It is designed to work with the same size limit switches that are standard on MPCNC. It works with Burly style mounts, but may also work with others (the lever has to hit the…
A while ago I created a battle tray for ATO. A concern of me is minimizing table footprint, and an issue was some of the Primordials require you to put tokens on top of their large Primordial card to mark specific Traits. This is a…
This is a 65mm spindle mount & vacuum nozzle for the MPCNC Primo J. I started with the original Burly mount cross section, and beefed up where it attaches to the z tubes. I made an adjustable height vacuum attachment for it, that bolts to…
Converted Ryan's great new MPCNC Primo design files to allow multi color printing Print instructions When printing colored areas on the bottom of the design that lack supports, magnify the XY (not Z) to something around 140%. Varies per…
This accessory is an add-on to V1 Engineering's MPCNC Primo version CNC machine and provides a dust collection attachment to the Dremel 4000 Mount. See https://www.thingiverse.com/thing:4541546 . Here is a short animation showing the…
The Laser Tree K20 is too big for the nifty laser mounts that slip into the Makita mount. Changing mounts on the Primo is about the worst thing you want to do, so I went the next best route and mounted the laser on the outside of the…
This will help drill the nut trap 2 holes for the Z assembly. Use a clamp to secure it to a bench and use a Handheld Drill, it will also work on a Drill press. The part will have a gap of 1mm, DON'T press to hard, you don't want to crack…
MPCNC Primo mount for Mafell FM 1000 (PV). It has a 43 mm Euro Mount that might fit other tools as well. Remix of https://www.thingiverse.com/thing:4827280 by LukeSilver I changed the diameter and length of the screw an the nut, that the…
Not that there is anything wrong with drilling the holes out on a Burly tool mount, but that just didn't sound optimal to me. So I remixed it for all to enjoy. The original stl file I used is the MPCNC Burly J 6-32 tool mount:…
[Edit: Also check out version 2 of my z chain mount for an alternative configuration. It uses a wedge to anchor to the inside of the z tubes from the top. https://www.thingiverse.com/thing:4705663 ] I made this thing to hold cable chain…
https://www.printables.com/model/1410760-upd-articulated-roblox-figure
Ich habe mir eine MPCNC Primo gebaut, mit ein paar Änderungen. An Stelle der Rohr-Profile in den Ecken habe ich einen Rahmen aus ITEM-Profilen gebaut, der sauber im rechten Winkel sitzt. Auf den Eck-Profilen habe ich Adapter sitzen, die…
I was having difficulty drilling the holes needed in the Z rails for the MPCNC Primo. I used stainless steel pipe and not having a drill press they were hard to drill accurate holes. My drill kept slipping so I made this to help. This…
This custom-designed 3D-printable mount allows you to securely attach a Fujitsu Esprimo Q556 mini PC under your desk for a clean and space-saving setup. It ensures a snug fit while keeping all ports easily accessible. The bracket is…
This set of design provides a mount for the Dremel 4000 router unto the Primo version of MPCNC (Mostly Printed CNC). Print Settings Resolution: .025 Infill: 35% Notes: PTEG is recommended for these parts since strength and some…
[ Updated version... tested and MPCNC Primo approved (unofficially;) )! I removed the old STL and replaced it with new versions. Both newer versions have a shortened clamp nose to eliminate interference with the home corner parts on a…
In addition to the my other accessories I have created a version for the standard PRIMO - even if you see the alu frame on the fotos. These accessories contain the following parts: * Drag-Chain-Mounts for 25mm pipes They can be used for…
Building the MPCNC Primo you typically get the effect, that the truck pipes (steel pipes on which the core is running on) are not exactly orthogonal to each other. Very often you get an angle of 89° to 90° between, which also results in…
These end caps are for 25x2mm tubes. They are available in a variety of hole sizes so that the control cables for the steppers can be passed through. There is also a blind plug. They are step files, so feel free to make changes yourself…
Meistens arbeite ich mit der MPCNC-Primo mit der Makita Fräse. Um auf den Folienschneider zu wechseln ist es recht aufwendig, jedesmal einen anderen Werkzeughalter zu montieren. Deshalb habe ich den Stifthalter von Allted so angepasst,…
I used support for the big hole on the bottom, but used a support blocker for the smaller hole, since removal would be very difficult. Printed in PC blend, probably PETG would be fine as well.
A straight version (25mm tube F) of the MPCNC 4040 corner feet for support on the sides. Uses 2 M8 bolts and 1 M5 20mm DIN screw and lock nut. No supports needed, infill 20%, 0.4mm layer height.
Designed a case for my Raspberry Pi 5 with a Primoroni Duo NVMe HAT. No supports needed, I used four M2,5 x 10 mm screws to attach the cover. The grill is optional, if u wnat to use gpio or camera (you can design your own grill for that…
Simply print off either the 23.5, 25, or 25.4mm OD model for your size of conduit, insert 2 ea. M5x30mm screws and 2 ea M5 nylock nuts(from the BOM), then your Z-rail flush with the “flush end” printed on the jig, then use the 2 holes to…
Tools for stabilizing the MPCNC PRIMO Here some quite easy but very effective tools to strengthen and stabilize the MPCNC PRIMO. * Core stabilizer : Possibility to add a second nut at the bottom of the core. It is designed for using a…
Similar to the earlier version of MPCNC I have directly modified and optimized a couple of thing at my MPCNC PRIMO. Especially for a better calibration but also stability I have built the MPCNC on a Alu frame (30 x 30 mm) B-Type Nut 8.…
Hey everyone this is a dust shoe that I modified from Nick Ellson's original design. He designed most of this and I simply modified it so it would fit my dust hose. My dust hose is the one from the Rigid Car Accessory kit from Home Depot.…
I designed this thing to secure a Z cable chain to the top of the Y-axis on my MPCNC Primo J. I originally designed a clamp style mount ( https://www.thingiverse.com/thing:4672652 ), but I wanted to use that hard point to add on a heavier…
Some simple feet for the Fujitsu mini tower aka. ESPRIMO D series. The measurement was taken from a D756 but it should fit all D series cases. You need 4 “standard” pc screws to install the feet. See the head shape in the pictures.…
I was looking for an M5 screw Universal tool mount (fromHicWic) for the MPCNC Primo but could not find any. So I used the SCAD model from GeoDave to create the basic model and Fusion 360 to make some adjustments: Fit M5 round-head screws…
Adds holes for a magnet and the two pass through bolts for the Jtech 7w Laser with the magnetic mount. Lets you easily clip the laser on and off with the magnets without removing the spindle. You will need 4 8x3mm magnets…
I wanted a way to hold my 2 esprimo®'s closer together than Roberts original design allowed. Thanks To Robert for making the original idea, design and time put into the original model. Usage: Print 1 front, 1 back bracket and 2 struts…
La prima prova di studio vaso con Fusion 360
Diese Halterungen für Induktive Switches können individuell an allen Varianten der MPCNC PRIMO eingesetzt werden, unabhängig davon, wie der Aufbau gestaltet wurde. Aus meiner Sicht sind induktive Switches ein MUSS für alle, die wirklich…
I printed it out in PETG. However with the step files, you can order the faceplate out of metal from services like JLCCNC or similar. For assembly just use heat set inserts (M4 5x6mm) and M4x8 bolts. The bolts on the side are M2,5 however…
Gut möglich, daß die Produktdesigner bei Fujitsu® etwas Anderes im Sinn hatten, aber das Ding hält die Platte fest und verriegelt… was will man mehr. :) Viel Spaß beim Drucken! Print Settings Printer Brand: Anycubic Printer: Vyper Rafts:…
Description Language: DE, ENG, FR, CZ Configurable: YES CAD Program: FreeCAD DE Halterung für die Schiene des oberen Rohrverbinders bei der MPCNC Primo. Die Halterung kann auf die bestehenden Klemmen aufgeschraubt werden (bei mir hatte…
I finally upgraded my LowRider 2 MPCNC from wooden side rails to the Superstrut metal rails I have had laying here for the longest time. Through the V1 Engineering Forum I had found some awesome "endcap + belt tensioners" by pilotkip,…
Just sharing the parts I designed while building the amazing Project by V1Engineering: Mostly Printed CNC Primo F-25mm MPCNC by V1 Engineering | Download free STL model | Printables.com The end stop is screwed to the holder with two M2.5…
Aug. 15, 2025 V2.0: First release on printables To my knowledge, this bracket is not available as a spare part and since I needed one, I designed it myself. It fits my JUWEL aquarium lid, but may also fit other brands. USE PETG!
Simple mount for Primochill CTR Reservoir w/ D5 Motor into the Thermal Take Tower 900 Holes are for M5 Grub screws, if your tolerances are good you only need one! Mounts to the frontmost reservoir plates in the case using M5 screws, you…
The Eheim fish feeder is one of the best designed models. This is the adapter to match Juwel Primo aquariums . There are two different funnels included: Short one, which just ensures that the food does not spill around and lands inside…
Some parts for the MPCNC Primo with Mafell PV1000. The brush height for the collector shoe should not be larger than 30mm and the width more than 5mm. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
Core Adjustment Tool for the US Version (25.4mm tubes) Building the MPCNC Primo you typically get the effect, that the truck pipes (steel pipes on which the core is running on) are not exactly orthogonal to each other. Very often you get…
Chaos Bust is a detailed 3D printable statue inspired by Chaos , the primordial force of the void and one of the first beings in Greek mythology. The model features a dramatic half-formed face surrounded by swirling chaotic forms ,…
Nyx Bust is a detailed 3D printable statue inspired by Nyx , the primordial Greek goddess of the night and one of the most mysterious beings in Greek mythology. The model features Nyx with a hooded veil, delicate wings and a crescent moon…
Description Language: DE, ENG, FR, CZ Configurable: YES CAD Program: FreeCAD DE Schleppkettenhalterung für die MPCNC Primo. Für die Befestigung müssen keine Schrauben gebohrt werden. Es handelt sich um ein Steckelement, welches bei mir…
Remixed https://www.printables.com/model/191040-mpcnc-drag-chain-cable-carrier-for-xy-axis/remixes
The difference between files is 16mm in length, as 90º doesn't need as much space as flat SATA cables DISCLAIMER: THE PHOTOS REFLECT THE ORIGINAL DESIGN. THE .STL FILES ARE SHORTER AND WORK AS EXPECTED. I'M JUST LAZY AT THIS POINT TO NOT…
"button back.stl" need to printed on the side + supports Both should be glued together before installation. (Compression Spring 10x12mm needed)
Gaia Bust is a detailed 3D printable statue inspired by Gaia , the primordial Greek goddess of the Earth and mother of many divine beings. The model features Gaia with a serene expression, floral adornments and two infants cradled within…
![Universal Tool Mount for MPCNC Primo (M5 screws!) [Originally by HicWic]](https://media.printables.com/media/prints/742403/images/5797188_28e1f2af-db42-4e7d-9666-d81e0d0b113c_194fa2d6-951c-4151-a39e-9f6332101b29/universalmount.png)
