MPCNC Primo "C" - HGR15 Upgrade Files
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For upgrading just the cross beams to HGR15 linear rails (side rails/frame stay the same)
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 283
- Wydruki
- 0
- Wyświetlenia
- 2100
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
NOTE: For Primo “C” only (23.5mm OD conduit). Would probably be easy to adapt to the other variants, but I haven't tried.
As part of an overhaul of my MPCNC, I was able to get super cheap HGR15 linear rails from Vevor, and designed adapters to the core, and an adapter for the trucks. You will need 2 core adapters (the large parts), and 4 truck adapters (the small cylindrical parts). Print the core adapters standing on end, with supports. The supports required are minimal and easy to remove.
(NOTE: It's okay of the cylindrical truck adapters break in half. They will still work, they will just be a little more annoying to get assembled)
I found out that the bare rails, as heavy as they are, are still not nearly as stiff as the original steel conduit. However, attaching a piece of 2020 or 2040 extrusion to them stiffens them up dramatically. It's explained in greater detail in my discussion video about my upgrades: