MPCNC Primo J 25.4mm Z-nut trap Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This will help drill the nut trap 2 holes for the Z assembly.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 532
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This will help drill the nut trap 2 holes for the Z assembly.
Use a clamp to secure it to a bench and use a Handheld Drill, it will also work on a Drill press. The part will have a gap of 1mm, DON'T press to hard, you don't want to crack it!!
I strongly suggest to use a Center Hole Puncher like this one,
https://www.amazon.com/Neiko-02638A-Automatic-Center-Adjustable/dp/B008DXYOLC/ref=sr_1_2?crid=P9P9XJQWCBK4&dchild=1&keywords=automatic+hole+punch+tool+for+metal&qid=1592931194&sprefix=automatic+metal+hole+punc%2Caps%2C162&sr=8-2
The 2 holes on the Jig are 5.5mm diameter so use. 5.4mm, number 3 drill bit (0.213 in) If you don't care use a 7/32" bit (0.2188 in)
Print instructions
Printer:
CR10S PRO
20%
Filament_brand:
Whatever you have on hand
Filament_material:
PLA