MPCNC Primo J 25.4mm Z-nut trap Jig
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This will help drill the nut trap 2 holes for the Z assembly.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 71
- Makes
- 0
- Views
- 532
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This will help drill the nut trap 2 holes for the Z assembly.
Use a clamp to secure it to a bench and use a Handheld Drill, it will also work on a Drill press. The part will have a gap of 1mm, DON'T press to hard, you don't want to crack it!!
I strongly suggest to use a Center Hole Puncher like this one,
https://www.amazon.com/Neiko-02638A-Automatic-Center-Adjustable/dp/B008DXYOLC/ref=sr_1_2?crid=P9P9XJQWCBK4&dchild=1&keywords=automatic+hole+punch+tool+for+metal&qid=1592931194&sprefix=automatic+metal+hole+punc%2Caps%2C162&sr=8-2
The 2 holes on the Jig are 5.5mm diameter so use. 5.4mm, number 3 drill bit (0.213 in) If you don't care use a 7/32" bit (0.2188 in)
Print instructions
Printer:
CR10S PRO
20%
Filament_brand:
Whatever you have on hand
Filament_material:
PLA