MPCNC Primo AMB 1050 FME 43mm tool mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 43mm spindle mount - based on AMB 1050 FME-1.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 516
- Wydruki
- 2
- Wyświetlenia
- 2975
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 43mm spindle mount - based on AMB 1050 FME-1.
(including an adapted NutTrap and Drill Guide)
All is fitted for the MPCNC Primo 25mm version!
(https://www.prusaprinters.org/prints/37292-mostly-printed-cnc-primo-f-25mm-mpcnc)
Designed in FreeCAD - I share the model and the STL.
open issues:
- Also two screws in the 43mm holder are hard to screw in - there I have to do a small redesign
The 3mf files are for a PrusaMini with 0,6mm nozzle.
Filament of choice is Prusament PLA.
License is based on V1engineering premises.
Print instructions
I suggest using the guidelines from Ryan (v1engineering.com)
Material PLA
Nozzle 0,6mm
0,4mm layer height
Tool holder:
4 perimeters
top and bottom 4 solid layers
I will use infill 30% Gyroid
Nut trap:
2 perimeters
top and bottom 2 solid layers
I will use infill 15% Gyroid
Drill Guide:
2 perimeters
top and bottom 2 solid layers
I will use infill 10% Gyroid