Hermit Crab Strain relief
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A strain relief that fits all the wires nice and snug.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 101
- Wydruki
- 1
- Wyświetlenia
- 564
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Hermit Crab Strain Relief
I made a strain relief that holds the wires really solid and in a vertical position to allow maximum height clearance.
I used two M2 heat inserts in the top to holes to attach. I feel like you might be able to use the same holes and M3 screws if you don't have heat inserts. I used two zap straps to secure the wire in the strain relief. In the end this is very sturdy and doesn't allow the wires to bend repeatedly.
I printed the model as the slicer picture shows with support to allow a nice finish on the outside.
Print Settings:
.2 layer height
25% infill
Matte Black Overture PLA
nozzle 205
bed 60