CR-30 Extra Part Origami Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CR-30 Extra Part Origami Box
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 237
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
A fun folding origami box to store things in. This features a magnetic lid and magnetic attachemen. Although the magnetic attachment is not very sturdy unless you have very strong magnets.
There is a 3D printed push pin that can be used to hold the box together, but it's not very sturdy. I would recommend using a M3x10 screw instead.
There are 2 model options:
Option 1 with the magnet pockets closed (10x3mm magnets) magnets should be inserted during the print
Option 2 with the magnet pockets open so you can glue in 10mm diameter magnets after the print is finished.
Prints without supports!