CR-30 Extra Part Origami Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
CR-30 Extra Part Origami Box
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 35
- Makes
- 0
- Views
- 237
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
A fun folding origami box to store things in. This features a magnetic lid and magnetic attachemen. Although the magnetic attachment is not very sturdy unless you have very strong magnets.
There is a 3D printed push pin that can be used to hold the box together, but it's not very sturdy. I would recommend using a M3x10 screw instead.
There are 2 model options:
Option 1 with the magnet pockets closed (10x3mm magnets) magnets should be inserted during the print
Option 2 with the magnet pockets open so you can glue in 10mm diameter magnets after the print is finished.
Prints without supports!