[Printer-Box] Enclosure - Lateral Temperature Control Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bracket will help retain the temperature control panel to the side of the Printer-Box enclosure.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 344
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The lateral temperature for the Printer-Box enclosure contains a model for a bracket to hold it to the panel. However, this didn't work as the holes were too large to use the plastic to screw into. It also couldn't clear the bottom metal bracket. Using bolts is an option, but I found it too frustrating to get the lower nuts threaded onto the screws.
So I designed a part that would hold the nuts and clear all the obstructions. It was designed around the square nuts supplied by Printer-Box for the enclosure. I recommend using the M3x12 screw to ensure good thread engagement.
Printing Tips
- Slicer file provided for site metrics only.
- I only have a 3MF this time as my CAD package refused to export an STL for some reason. This was definitely a software issue an not a design issue.