[Printer-Box] Enclosure - Lateral Temperature Control Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.61 – €0.74 net (excluding VAT)
For file: Lateral Temperature Control Retainer_0.2mm_PETG_MK3S_46m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.68 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 46.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This bracket will help retain the temperature control panel to the side of the Printer-Box enclosure.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 15
- Makes
- 0
- Views
- 344
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The lateral temperature for the Printer-Box enclosure contains a model for a bracket to hold it to the panel. However, this didn't work as the holes were too large to use the plastic to screw into. It also couldn't clear the bottom metal bracket. Using bolts is an option, but I found it too frustrating to get the lower nuts threaded onto the screws.
So I designed a part that would hold the nuts and clear all the obstructions. It was designed around the square nuts supplied by Printer-Box for the enclosure. I recommend using the M3x12 screw to ensure good thread engagement.
Printing Tips
- Slicer file provided for site metrics only.
- I only have a 3MF this time as my CAD package refused to export an STL for some reason. This was definitely a software issue an not a design issue.