1 / 4

KOSS UR20 adjust adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

devlab

@devlab_524896

If your 20-year-old KOSS UR20 headphones are falling apart and you don't want to pollute nature even more by throwing…

Ocena: 0 / 5
Polubienia: 2
Pobrania: 23
Wydruki: 0
Wyświetlenia: 226
Oceny: 0

Aktualizacja u źródła: 6 sty 2023

Informacje o modelu

Źródło: Printables
Kategoria: Audio
Licencja: Creative Commons — Attribution

Szczegóły Pliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (5)

If your 20-year-old KOSS UR20 headphones are falling apart and you don't want to pollute nature even more by throwing them away, but you are not a follower of fixing everything with duct tape, this thing can help you.

Print Settings

Printer:

RepRap Mendel

Rafts:

Supports:

Resolution:

0.3

Infill:

100

Filament:

3dplast.biz CoPET

black Broken part ===========

If the broken thing is not like the one shown in the pictures below, this is not your lucky day.

Printing ========

To replace a broken part, you have to print 2 other parts instead. There are two reasons why it was designed this way:

The original part cannot be printed without supports, and I do not like to clean support structures.
There is a wire that runs through the original part, but I am too lazy to unsolder it and then solder it back.

I have printed the details with CoPET, which is durable, but still good to print small details.
Although the printed parts look a bit messy, they fit well and not visible.

When the parts are printed, check how the first part (to the right on picture above) fits inside the rails where was the broken part. When you move it on the rails, it should fix with clicks in the adjustment positions.