Travel Storage Box for Jewelry
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this for my fiance's ring if she ever needs to keep it somewhere safe. Fits anything up to the size of a quarter.
- Ocena
- 0 / 5
- Polubienia
- 59
- Pobrania
- 155
- Wydruki
- 0
- Wyświetlenia
- 1284
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
There are two pieces, print them both in the orientation as downloaded. I used a little bit of support for the inside area of the outside box piece. If it was just a normal bridge area it wouldn't be necessary. But there is a bore for the magnet to fit into and that makes it kind of messy printing without support.
I used 3mm x 8mm neodymium magnets and superglued them into the bores. This makes it fairly secure when the box is closed, and it wont open unless you open it. But it's not difficult to open either, I think it's balanced well with this magnet.