Minimal Business Card Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This minimal design holds about 100 business cards and looks great on any desk or counter.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 114
- Wydruki
- 1
- Wyświetlenia
- 402
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This simple business card stand holds 100x 320gsm business cards, you might get more or less than me depending on the thickness of your cards.
Holds business cards up at a nice angle, cut out at the front shows a bit more of your logo. Looks great on any desk, minimal design means that the design on your business cards will stand out.
There are two sizes, 90mm wide and 85mm wide, these seemed to be common widths for business cards. Let me know if you want a different size, or just scale along the X or Y axis to stretch it 😎
Not much else to say! I printed mine in black PETG, 0.6mm nozzle with:
- no supports
- 3-4 perimeters
- 3-4 top/bottom layers
- seams at rear
Enjoy! 😊