1 / 3
Knob for Rockler Auto-Lock T-Track Clamps — zdjęcie 1
1 / 3

Knob for Rockler Auto-Lock T-Track Clamps

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Knob to allow use of 1/4" bolts with Rockler T-Track clamps.

Ocena
0 / 5
Polubienia
3
Pobrania
28
Wydruki
0
Wyświetlenia
216
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

A knob to allow use of Rockler Auto-Lock T-Track clamps (horizontal and hold down) with 1/4" bolts for standard t-track. The 5/16" track bolts that are standard with the clamps are too wide for 1/4" t-track.

I printed with PLA 30% infill with 6 top and bottom layers.

The nut hole is a very tight fit on purpose. I used a bolt to pull the nut into it.

For the t-track on my CNC, 1" bolts are the correct length. You may need longer or shorter bolts depending on how your t-track is installed.

Tagi