1 / 3
Knob for Rockler Auto-Lock T-Track Clamps
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Knob to allow use of 1/4" bolts with Rockler T-Track clamps.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 28
- Makes
- 0
- Views
- 216
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
A knob to allow use of Rockler Auto-Lock T-Track clamps (horizontal and hold down) with 1/4" bolts for standard t-track. The 5/16" track bolts that are standard with the clamps are too wide for 1/4" t-track.
I printed with PLA 30% infill with 6 top and bottom layers.
The nut hole is a very tight fit on purpose. I used a bolt to pull the nut into it.
For the t-track on my CNC, 1" bolts are the correct length. You may need longer or shorter bolts depending on how your t-track is installed.