Bottom clamp for Bosch intuvia eBike computer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clamp to mount a Bosch Intuvia eBike system 2 computer to the counterpart on your bike handlebar.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 169
- Wydruki
- 1
- Wyświetlenia
- 657
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Jumping on my e-bike one day I noticed that the computer, required to control the electronics, was dangling on the handlebar. One of the clamps was missing, probably just fell off. So I took the remaining clamp and modeled a replacement copy of that.
If you have experienced a similar story, you can use this to print your replacement and fix the bike computer :)
I printed this with 30% infill in PETG with supports. Not sure if the supports are really required, but wanted to make sure.
For the screws you need two M4x18mm.