Floating Turtle Duck (ATLA)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
(I added floating because I found out right after posting that they do indeed float without tipping over!) This model…
- Ocena
- 5 / 5
- Polubienia
- 146
- Pobrania
- 661
- Wydruki
- 9
- Wyświetlenia
- 2202
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution — Share Alike
(I added floating because I found out right after posting that they do indeed float without tipping over!)
This model was made by one of my friends for some 3D renders in blender. He showed it to me and I asked if it would be possible for me to edit the model to make it 3D printer friendly, and he kindly said yes! Feel free to print smaller or bigger, though the smaller versions become harder with adhesion because of the small feets.
This model can be sold when printed, but the file or remixes of it shall not be sold without permission first. Please be responsible with printing <3
Thanks again to Husam Staubmann, the friend that made the original model I edited here!
Here is his artstation, make sure to give him some support! https://www.artstation.com/artwork/3dOWQA
Print Settings
Printer:
Elegoo Neptune 2
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.15mm - .2mm
Infill:
5%-20%
Filament:
Polyaclehmy PLAGranite FX
Notes:
Make sure to be careful with the adhesion of the little feets. Also, make sure you have good cooling if planning on printing with no supports. It is possible to print them with no supports, but the beak can be a challenging overhang for some weaker cooling systems.
Category: Animals