Liczymy pasujące modele…
This is my model of the Atlantis as seen in Stargate Atlanis tv series. Model is over 60cm in diameter and approaches 3 kilos. It has already built in preparation for the LED lights so if you want to make the towers and stardrive lit, you…
Atlas Rubic Cube Holder for standard 56mm 3x3 Rubic Cube (should hold other cubes in similar dimensions as well, like the larger metal puzzle cube picture). Requires minimal Support for the Head, Butt and arms. If your printer does…
Update I have done a 'version 2' of this object: https://www.thingiverse.com/thing:5169130 . It's not a huge change, it mostly fixes some anatomical/proportional issues. However the new version is also more bulky with defined musculature.…
This is the third of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
This is the fourth of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
This is the first of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
This is the second of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
This is Atlas holding the Earth, keep it up! Category: Sculptures
This is the sixth and final ship of the six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the…
MechWarrior Online Atlas, roughly 140mm tall. Fully articulated, and tested, all parts should be 100% printer friendly and error free. Most of the joints are the same as the Articulated MWO Atlas by 7Fish (…
This is the bonus ship designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
Chronologie : 10/08/2021 : Disponible à la vente en ligne (système entièrement monté et testé) :…
This is the fifth of six ship models design to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
I removed the extra objects from the model.
Added a color change at 2.2. Gcode attached.
🇲🇽 Welcome to Mexico! This is a companion model of the Ancient Ruins Collection - Mesoamerica entry of Tula . Atlantean figures are carved stone support columns or pillars in the shape of fierce men in prehispanic Mesoamerica. This…
Clanmate asked me to design this. You will need 6.35mm (0.25in) dowels in many locations to hold it all together, including a big one straight down the center. Over all length is 39inches. I used fandom measurements that the blade was 27…
I made this decorative column, with an Atlas motif, to be part of my miniature storage solution... but they could certainly be used as terrain in a tabletop RPG as well! This model prints without supports and has a 10mm x 2mm hole in the…
MMU remix Costa Atlantica cruise ship
Atlas Lamp v2 Remixed to hold an Echo Dot 4th Gen. Thought this would be a fun project. Scaled and remixed in Fusion 360. Added a statue base for stability, the Dot is heavy enough you need a base. Will add a plain non-embossed base…
Fortnite Muscle-Cat Atlas Statue. Meowscles Add your own globe, thing, whatever you want, to the plate.
(I added floating because I found out right after posting that they do indeed float without tipping over!) This model was made by one of my friends for some 3D renders in blender. He showed it to me and I asked if it would be possible for…
Low poly model of the Titan Atlas (Greek Mythology) In Greek mythology, Atlas is a Titan condemned to hold up the heavens or sky for eternity after the Titanomachy. Atlas also plays a role in the myths of two of the greatest Greek heroes:…
I wanted an Atlas holding a Google Mini, and I couldn't find one. I don't know how to do 3d modeling, so I just combined existing models in Prusa Slices with some slicing and negative volume objects. Added some support enforcers, so you…
Made this cool sculpture using photogrammetry and processed it up in Blender for extra detail. It was the inspiration for the art in Civilization IV, and people often mistake it for the Titan Atlas punished by Zeus. This is my first go at…
Badge de l'expédition Atlantis de la série Stargate Atlantis, fixer 2 petits aimant 6*2 et il ira parfaitement sur votre réfrigérateur ou autre ;) Possible aussi de l'adapter pour le fixer autrement. Pour un meilleur rendu faire un…
Atlanta Falcons Logo 1st Layer White 2nd Red 3rd Black
Model is subject to change as currently I am working on something much bigger ;) The model of the first two cervical spinal vertebrae, commonly referred to as atlas and axis along with the vertebral artery. All models were sculpted in…
The back needs a little bit more space so the cable can go through the hole. It is just a merged model so you can scale ATLAS so the hands helps holding the google home, but it works jut fine because the holder is tilted to the back The…
Time and material saving The model has been designed to enable fast, simple and material-saving printing. There are larger and more detailed models, but these require a much larger print area or the printing of several parts. Improvements…
biggest submarine from subnautica
A Stargate Atlantis Themed Door Controller that I remixed from a 3D model by "Ksst" that I found on Google Sketch-Up 3D Warehouse. https://3dwarehouse.sketchup.com/model/d647c7413566a8e9fae947e64ee50374/Atlantis-motion-sensor I made space…
Atlantic sturgeon Originally, the Atlantic sturgeon was considered a worthless fish. Its rough skin would often rip nets, keeping fishermen from catching more profitable fish. Sturgeon were one of the types of fish harvested at the first…
This is a set of rock formations that will fit onto the main 4-6 player map of Guards of Atlantis II. It includes the 1 space, 2 space, 3 space & 4 space formations that I felt really mattered for the game. I did not make the back walls…
The original seal for my IKEA Atlant kitchen sink plug broke - it wouldn't stay open any more due to the corners of the little standoffs being rubbed off by years of usage. As there where only a few clunky 3d models available online i…
This is the bonus ship designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and serves as and addon to the Atlantis scaled fleet.
Crafted specifically for 3D printing, my fan-designed Stargate Atlantis deluxe model brings the iconic sci-fi portal to life. Measuring over 27 inches (685mm) in width, the design showcases intricate detailing on both the front and back.…
This is the bonus ship designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and serves as and addon to the Atlantis scaled fleet.
This is a remix of https://www.printables.com/model/253846-atlas-holding-a-google-mini It has an enlarged hole for the Google Mini cable to go through. This make also opens correctly in Cura and other 3D programs.
I've included my models for the main and secondary side buttons PCB in case anyone finds it helpful to create their own mod. That said, only the main PCB is tested for accuracy as that is the one I used in this model. For assembly, slide…
I was having some issues printing the chin of the original model which printed without a connection to the chest and had a few prints fail because the bottom of the face fell off (even with supports). So decided to connected the chin to…
Originally started with the idea of recreating the Atlantis logo located in the City. I drew the logo in SVG to cut it out of the wood. See my final photo. To be able to share it with you, I made an STL version, you can also find the svg…
This is a remix of Fred's Dice Dagger.
The Ulysses from the Disney Movie Atlantis: The Lost Empire. Printed on my Longer LK5 Pro with raft and tree supports. Available to print as a whole or as two parts. My favorite movie growing up, I just had to have myself a model of the…
Behold the D20 Atlas — a stunning 3D-printed figure that combines mythological power with tabletop gaming culture. This meticulously designed sculpture depicts a powerful Atlas figure in a dynamic kneeling pose, heroically supporting an…
Atlas Statue iWatch Charging Dock. Made by remixing from other author
Sorry file is so small, Scale to whatever size you need and should still work fine. Hope you like it :D
BEFORE YOU PRINT! This is a very old model, meaning it's not very well made. Assembling it is quite a task. Also, it's made to be sunk, so there are holes in the bottom of the hull, but they can be plugged if needed. All parts are in the…
I designed these boats to better hold the meeples in Survive: Escape from Atlantis! When moving the original boats during games, we found that the meeples inside would often fall out. In Survive , the point value is indicated on the…
This is the bonus ship designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and serves as and addon to the Atlantis scaled fleet
The air intake at the bottom of the unit is unobstructed. There is a cut out for connecting the power supply plug. You can route the cables to either side, or underneath the shelf. The buttons under the unit are accessible. The unit locks…
This is a display base for Stargate Atlantis, to replace the larger display base that came with the Stargate model. It is designed to be printed on a multi-color printer. For example a Bambu Labs printer like the AI or X1C with an AMS -…
A 1:100 scale model of ULA's Atlas V rocket. Files include components for building variants with 0 to 5 boosters and all 6 fairing sizes "Atlas V is an expendable launch system and the fifth major version in the Atlas launch vehicle…
I separated these from the original design to make downloads easier. Stargate Atlantis Glyphs, so you can now make an SGA Gate. I designed them to use 5mm LED's for the lights. Category: 3D Printing
I made an insert to put everything Atlantis Rising, including Monstrosities expansion and Orator promo, in a single box, with no lid lift. It fits sleeved cards (Mine are all sleeved with Swan PanAsia thick sleeves), but it's a tight fit…
The Atlantis Ring and its symbol are empowerment tools that help protect, balance and harmonize a person’s energy field. Its beneficial energetic properties help shield the aura and minimize the effect of harmful frequencies. It helps…
Atlas world litho print the litho at 1mm or 1.2 layer hight print speed 35mms , 50 travel speed 100%infill
This is an insert for the phenomenal game, Guards of Atlantis II. It's not the most compact design, but that's not really what I'm going for here. This insert aims to do one thing: get the game out from the boxes and onto the table as…
Aquarium decoration with coliseum ruins in atlantide format, you can also just cut and use some part of the file. Printed without supports, but be careful the bigger it is the longer the bridge the extruder will have to make.
Just swap this file for the one in the original design files.
Remote holder featuring the titan Atlas. There is both the newer and an older version included. The gap between his arms is exactly 40 mm (1 9/16") so you can scale the model accordingly to fit your remote. In the v2 you can choose to…
Very detailed Calakulumn (Or Karakulum) class Great battleship from space battleship yamato. While it is somewhat recommended for Resin printers with this, I did redesign this version of the model to be compatible with filament printers,…
Box Insert for Survive: Escape from Atlantis! aka The Island and it's expansion (5-6 players + dolphins / octopus / blue dice) Made to perfectly fit in the original box insert. You need to print one of each file, except you need 3 times…
Hi everyone. I am P1lotz , a professional 3D artist. I have worked in the field since 2019 and specialize in creating articulated creatures, particularly dragons. For once, I made a model that's not a dragon, but a trophy for the 3d…
Bot for car Geely Atlas Pro 2021-…
A faithful, stylized tribute to Atlas, eternally bearing the weight of the heavens. Strong. Silent. Absolutely shredded. This muscular legend is perfect for desks, display cases, or anyone needing a daily reminder that their grind is…
Printed on my LONGER LK5 Pro with raft and tree supports. I assembled the fins with hot glue and then left to cool. Blender 3.1 Eevee render
Atlas Baseball Stand - A Legendary Display for Your Prized Baseball Imagine the mighty Atlas, the titan from Greek mythology who carried the weight of the world on his shoulders, now holding onto your cherished baseball instead. This…
💧 🪨 🔥 💨 Water. Earth. Fire. Air . Long ago, the four nations lived together in harmony. Then, everything changed when the Fire Nation attacked I am a fan of Avatar: The Last Airbender , and so here are some super easy to print coasters or…
ARL-99 HELLDIVER From the Japanese multi-media franchise PATLABOR: The Mobile Police, the ARL-99 HELLDIVER is a Labor used by the Japanese Self-Defense Ground Forces, manufactured by Shinohara Heavy Industries. The OpenFigure3D version…
I redesigned the antenna mount for easier storage and transportation. 20240902:Upadted Folding Antenna Part 2.
short video: https://youtu.be/2hrvMfrzNSI
A Stargate Atlantis Themed Wall Light that i'm designed for accent lighting in my TV/Game Room. I made space to add 12v led light strips under each crystal and room for running wires. Note: I have not printed/tested the design yet. You…
Atlas R3, this version was generated from the drawing at the definition of the Atlas on Sarna.net Decent rendering! Relates to
Easy to print chainguide made specially for the Madnes Atlas frame. Might work with their other frames as well (Nova and Stellar). It's meant to keep the bike quiet and prevent the chain from hitting the chainstay. The outer frame can be…
Sub Pod Model from the movie Atlantis: The Lost Empire. Growing up Atlantis was my favorite Disney movie and I credit it for sparking all my creativity at a young age. I had started this model a year ago but only a few weeks ago did I try…
| BASIC DESCRIPTION | this is a headdress from avatar Kyoshi, as seen in the episode Avatar Day the shape and size of various pieces of the headdress is changing throughout the series and even in the episode, but this is an approximation…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Hello, i dont provide the sphere because of the logo, just create a Geosphere - Radius 120mm. Remember! just in case, if you scale down your sphere and the atlas-stand think of the dimensions of the cup for the cards.... because he will…
The Airbus A400M is a versatile military transport aircraft designed for a wide range of missions, including cargo transport, troop deployment, medical evacuation, and aerial refueling. Developed by Airbus Defence and Space, it combines…
This is a keychain I made for the atl braves I hope you like.
Bow before your god! (Or at least, your 3D printer). Bring the menace of the System Lords straight to your print bed with this highly detailed, 3D-printable Goa'uld symbiote. Whether you are a loyal Jaffa, a disguised Tok'ra, or just an…
Here is the awesome looking Atlanta Braves Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. (Chain Used: https://makerworld.com/en/models/25960#profileId-639228 )…
A fully printable Atlatl spear thrower. This Atlatl at full scale is 1x2x12 inches in size, plus the loading peg, and you may want to scale it down depending on the size of your fingers/hands. There is a hole where you can tie a finger…
Road Atlanta, Braselton, United States, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
I recently bought Harbor Freight's Atlas 80V lawn mower and wanted to mount it outside of the charger and tool so I made a wall mount for the battery. This mount should work for both the 40V and 80V batteries. I don't have the 40V battery…
A remix of a low poly Atlas, but instead of the world, he is holding a D20.
Here is the awesome looking Atlanta Falcons Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a Commercial License to sell my prints? Join my Patreon or Thangs…
Glaucus Atlanticus : Blue Dragon I would print this with a flubbery tpu. The Enigmatic Glaucus Atlanticus: A Celestial Dragon of the Sea Floating serenely on the ocean's surface is a creature of mythical beauty and potent danger: the…
Print with 2 walls and 30% infill for similar weight and feel. Try wood filament for the ultimate replacement.
I printed it at 20% infill on an Anycubic Vyper at a .15mm layer height and it turned out great! I printed the outside in Polymaker Blue PLA and the insert in Overture Silk Red.
A mount to attach your N3 or Atlas to wrist band, suit arms, swoop shorts or anywhere else you want it. Simply sew through the tpu, recommend a heavy duty sewing machine for ease but can be done by hand. If you struggle you can melt holes…
Multi layered atlanta falcons logo
Thank you for downloads, likes... Enjoy the model !
Seal rubber of iker Domsjö Atlant Print Settings Printer: Sidewinder X2 Rafts: No Supports: No Resolution: 0.15 Infill: 20% Gyroide Filament: Transparent 95A Premium TPU 95A Translucid Notes: No. Category: 3D Printing
This lid fits Atlas Mason jars. Please ensure that your jar's threads have 4 thread starts, or this will not fit.
Simple center console organizer for the 2020 Volkswagen Atlas Cross Sport. The name "Betty" in the photos has been removed from the model. To print on an Ender 3, you will need to separate the model into thee pieces and super-glue them…
Stingray - Captain Troy Tempest, Marina, Lieutenant Atlanta Shore, Lieutenant George Lee Phones Sheridan - 1964-1965 3D printable model.
