Bambu X1/X1C Spool Extender - Compatibility tweaks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extends the spool holder so it remains compatible with connected AMS. Tweaked the geometry for improved compatibility.
- Ocena
- 4,8 / 5
- Polubienia
- 60
- Pobrania
- 387
- Wydruki
- 7
- Wyświetlenia
- 1414
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Remixed geometry from ttoadd's spool extender, credits to them:
https://www.printables.com/model/338553-bambu-x1x1c-spool-extender
Extends the spool holder out to allow for the AMS to stay plugged in while you use it. Can be used in conjunction with thrutheframe's improved spool holder:
https://www.printables.com/model/278580-bambu-lab-spool-roller
Print settings
I used Bambu lab default 0.2 strength profile, ABS material. Should work with most other materials as well.
Required hardware:
- 2pcs of M3 x 30mm screws.
What stayed the same:
- Has the same overall length and clearances.
- Requires 2pcs of M3 x 30mm screws.
- Has support ribs that fit around the AMS connector for added stability.
What I changed:
- Added counterbore to second hole as well, so the spool holder can be used in default orientation or upside-down for thrutheframe's spool holder.
- Changed the shape of the support ribs to slope back down at the end. This guides the PTFE-tube to stay in place and not slide off.