Bambu X1/X1C Spool Extender - Compatibility tweaks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extends the spool holder so it remains compatible with connected AMS. Tweaked the geometry for improved compatibility.
- Rating
- 4.8 / 5
- Likes
- 60
- Downloads
- 387
- Makes
- 7
- Views
- 1,414
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Remixed geometry from ttoadd's spool extender, credits to them:
https://www.printables.com/model/338553-bambu-x1x1c-spool-extender
Extends the spool holder out to allow for the AMS to stay plugged in while you use it. Can be used in conjunction with thrutheframe's improved spool holder:
https://www.printables.com/model/278580-bambu-lab-spool-roller
Print settings
I used Bambu lab default 0.2 strength profile, ABS material. Should work with most other materials as well.
Required hardware:
- 2pcs of M3 x 30mm screws.
What stayed the same:
- Has the same overall length and clearances.
- Requires 2pcs of M3 x 30mm screws.
- Has support ribs that fit around the AMS connector for added stability.
What I changed:
- Added counterbore to second hole as well, so the spool holder can be used in default orientation or upside-down for thrutheframe's spool holder.
- Changed the shape of the support ribs to slope back down at the end. This guides the PTFE-tube to stay in place and not slide off.