1 / 1
YAREK [Printer-Box] Edition — zdjęcie 1

YAREK [Printer-Box] Edition

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I modified my favorite knob to work with the [Printer-Box] module control panel.

Ocena
0 / 5
Polubienia
2
Pobrania
13
Wydruki
0
Wyświetlenia
217
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Basically the same knob as my original YAREK, but it's been modified to fit the Module Control panel housing for the [Printer-Box] enclosure. 

Differences from the original are that it doesn't sit down as far on the encoder knob; has a slight taper on the collar to keep it from interfering with the housing; and it's shorter so that it clears the door. This will also work fine for OEM housing as well.

Printing Tips

  1. Sliced file is in PLA (highly unusual for me), but I still recommend you slice your own.
  2. Print with supports and a brim unless you want to feel the big sad.
  3. Autodesk's mesh service has been spotty lately so I could only produce a 3MF file. These are technically superior to the STL files.
  4. Print with glow-in-the-dark filament for great excitement.

Tagi