1 / 1
YAREK [Printer-Box] Edition
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I modified my favorite knob to work with the [Printer-Box] module control panel.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 217
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Basically the same knob as my original YAREK, but it's been modified to fit the Module Control panel housing for the [Printer-Box] enclosure.
Differences from the original are that it doesn't sit down as far on the encoder knob; has a slight taper on the collar to keep it from interfering with the housing; and it's shorter so that it clears the door. This will also work fine for OEM housing as well.
Printing Tips
- Sliced file is in PLA (highly unusual for me), but I still recommend you slice your own.
- Print with supports and a brim unless you want to feel the big sad.
- Autodesk's mesh service has been spotty lately so I could only produce a 3MF file. These are technically superior to the STL files.
- Print with glow-in-the-dark filament for great excitement.