OM2ZZ antenna wire eyelet for carbon pole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Eyelet for attaching the antenna wire to the top of the carbon mast.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 144
- Wydruki
- 1
- Wyświetlenia
- 721
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
I needed to figure out a way to attach the antenna wire to the carbon mast. The problem was that the top of the mast is made up of very thin parts. I decided to omit the first part and place the jig on the second part. It is still thin (and delicate) at the top, so the jig is placed at the bottom of the second piece from the top.
The fixture has a top diameter of 3.0 mm and a bottom diameter of 3.1 mm. When threaded onto the mast, it "snaps" into place. After that, it is enough to just rewind the antenna wire.
The material is PETG.