Jack stand block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Toyota MR2 Spyder has a unibody construction that easily gets crushed in the corners if you or your mechanic…
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 87
- Wydruki
- 1
- Wyświetlenia
- 706
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
The Toyota MR2 Spyder has a unibody construction that easily gets crushed in the corners if you or your mechanic aren't careful about finding the precise jacking points. I created these simple blocks to fit the jacking points of my 2003 model to my AC-Delco 2-ton jack stands. In addition, they should work fine as jack interface blocks for hydraulic lifts.
Print instructions
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0.2 mm
Infill: 15%
Filament: Prusament PETG Gray
Notes:
Use additional perimeters (I think I used 4 perimeters) to ensure strength or increase the infill. Print upside down (2 large squares facing down) to avoid needing supports.