Jack stand block
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Toyota MR2 Spyder has a unibody construction that easily gets crushed in the corners if you or your mechanic…
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 87
- Makes
- 1
- Views
- 706
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
The Toyota MR2 Spyder has a unibody construction that easily gets crushed in the corners if you or your mechanic aren't careful about finding the precise jacking points. I created these simple blocks to fit the jacking points of my 2003 model to my AC-Delco 2-ton jack stands. In addition, they should work fine as jack interface blocks for hydraulic lifts.
Print instructions
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0.2 mm
Infill: 15%
Filament: Prusament PETG Gray
Notes:
Use additional perimeters (I think I used 4 perimeters) to ensure strength or increase the infill. Print upside down (2 large squares facing down) to avoid needing supports.