IKEA IVAR drawer support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Support preventing drawer bottom sagging. Designed for IKEA IVAR drawers, but can be used with others as well.
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 239
- Wydruki
- 3
- Wyświetlenia
- 1278
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- BSD License
This 3D model is a drawer support designed to prevent sagging and improve the functionality of your drawers. It is specifically made to fit IKEA IVAR drawers, but can be used with other types as well (possibly with little modifications).
The model requires the use of two M2.5x18mm screws with countersunk heads for installation. Self tapping screws are recommended, and no pre-drilling is required.
I've printed the model using PETG and 25% infill on quality settings, but given the size it should be good enough with the defaults.