SMT10 Front Side Braces/Fenders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I managed to break the front cage of my SMT10 when a brick wall jumped out in front of me :-) This is a flat piece…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 48
- Wydruki
- 1
- Wyświetlenia
- 741
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I managed to break the front cage of my SMT10 when a brick wall jumped out in front of me :-)
This is a flat piece modeled to fit the shape of the frame on the front sides to be used as reinforcement. I like the look of the long brace once installed so I made one for the other side as well.
I've included files for the long ones I use, as well as some shorter ones that cut off the unsupported upper rear section.
Print instructions
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.2
Infill: 50 to 100 for strength
Filament: D3D PLA Grass Green
Notes:
If you don't go for a high infill, use extra perimeters to add strength to the bolt holes.
The filament I used that matches the Grave Digger frame colour is D3D PLA "Grass Green."