1 / 10
Clod Buster Wheel Adapter for Kyosho Mad Crusher — zdjęcie 1
1 / 10

Clod Buster Wheel Adapter for Kyosho Mad Crusher

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter to fit ClodBuster wheels on a Kyosho Mad Crusher adding just enough offset to clear the steering knuckles.

Ocena
0 / 5
Polubienia
9
Pobrania
61
Wydruki
0
Wyświetlenia
1265
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Adapter to fit ClodBuster wheels on a Kyosho Mad Crusher adding just enough offset to clear the steering knuckles.

  • The bolt holes are modeled to fit over the studs on the back of original Clod Buster wheels.
  • To drill the bolt holes, place the adapter in the wheel and drill 2.5mm or 3/32" holes through the wheel using the adapter as a guide.
  • Remove the adapter and enlarge the holes in the wheel to approximately 3mm. I found that a 1/8" bit can be used while keeping a thin tube form the original studs.
  • Mount the wheels to the rims using M3 bolts. 12mm is a good length to clear the chamfer and bite into the adapter.
  • Use M5x16 bolts with blue locktite or lock washers to mount the wheels on the axles. Use M5x18 if you are using thick washers like Nord-Lock.

 

Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: Doesn't Matter

Supports: No

Resolution: 0.2

Filament: Kodak PLA+ 
Notes:

I used PLA+, but any rigid filament should work as long as you have medium or high infill and use extra perimeters to ensure strong walls for the bolt and hex holes.

I used 35% infill with 6 perimeters.

How I Designed This

I designed this hub adapter by modifying the scad script "Customisable SLW Style Hub for RC Wheel" by jruutiai. http://www.thingiverse.com/thing:2201304

Tagi