Ender 5 Plus Low Profile Direct Drive Filament Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low profile filament guide and sensor mount for use on the Ender 5 Plus with the Micro Swiss Direct Drive upgrade kit.
- Ocena
- 5 / 5
- Polubienia
- 76
- Pobrania
- 427
- Wydruki
- 1
- Wyświetlenia
- 2016
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a low profile Filament guide and sensor mount intended for use on the Ender 5 Plus with Micro Swiss Direct Drive upgrade. I felt the stock mount was too large and unnecessary, so I designed this to work with the black plastic collar and red 3D printed shim provided with the Micro Swiss kit. It mounts in the same place using all the stock screws. The Filament sensor screws will have to tap their own holes. I also designed it to be super easy to print with no supports.
It may work on other direct drive kits or other Creality printers, but I'm not sure.