Cablemanagement Original Prusa Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cleaner look thanks to cable cover for the original Prusa Enclosure
- Ocena
- 4,889 / 5
- Polubienia
- 415
- Pobrania
- 1145
- Wydruki
- 49
- Wyświetlenia
- 6498
- Oceny
- 45
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I like it tidy, so I designed a cover for the loose cables that are needed for the extensions of the LED strip and the filter system, which can be simply pushed or clipped on by means of a holder. I think this is a neat thing and it also offers enough space for other extensions.
Update:
27.01.2023 > Added CableCoverHolder_HingedLid.3mf for those who use the Hinged Lid addon
What Parts do you need?
For LED strip you only need to Print CableCoverLong.3mf and three CableCoverHolder.3mf
- 3x Screws M3 x 6mm
- 3x Hexagon nuts M3
________________
If you have the Advanced Filtration System you need to Print CableCoverLong.3mf, CableCoverShord.3mf, and nine CableCoverHolder.3mf.
- 9x Screws M3 x 6mm
- 9x Hexagon nuts M3
In case you use Hinged Lid addon you need to replace two CableCoverHolder.3mf with the CableCoverHolder_HingedLid.3mf ones an two Screws to M3 x 10mm!
Attension! One of the Covers for Advanced Filtration System has a short recess for the cable so dont use the wrong one :-)
Material
- Screws M3 x 6mm
- Screws M3 x 10mm
- Hexagon nuts M3
You like my Work?
Check out my other Enclosure Addons
Support my efforts and push the like ❤
Make my day and post yout Makes
Print instructions
Simple print
No support needed
PETG or PLA on 0.2mm, 100% Infill and 3 Parameters of course with original Prusament!
Happy Printing!!!