Cablemanagement Original Prusa Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cleaner look thanks to cable cover for the original Prusa Enclosure
- Rating
- 4.889 / 5
- Likes
- 415
- Downloads
- 1,145
- Makes
- 49
- Views
- 6,498
- Reviews
- 45
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I like it tidy, so I designed a cover for the loose cables that are needed for the extensions of the LED strip and the filter system, which can be simply pushed or clipped on by means of a holder. I think this is a neat thing and it also offers enough space for other extensions.
Update:
27.01.2023 > Added CableCoverHolder_HingedLid.3mf for those who use the Hinged Lid addon
What Parts do you need?
For LED strip you only need to Print CableCoverLong.3mf and three CableCoverHolder.3mf
- 3x Screws M3 x 6mm
- 3x Hexagon nuts M3
________________
If you have the Advanced Filtration System you need to Print CableCoverLong.3mf, CableCoverShord.3mf, and nine CableCoverHolder.3mf.
- 9x Screws M3 x 6mm
- 9x Hexagon nuts M3
In case you use Hinged Lid addon you need to replace two CableCoverHolder.3mf with the CableCoverHolder_HingedLid.3mf ones an two Screws to M3 x 10mm!
Attension! One of the Covers for Advanced Filtration System has a short recess for the cable so dont use the wrong one :-)
Material
- Screws M3 x 6mm
- Screws M3 x 10mm
- Hexagon nuts M3
You like my Work?
Check out my other Enclosure Addons
Support my efforts and push the like ❤
Make my day and post yout Makes
Print instructions
Simple print
No support needed
PETG or PLA on 0.2mm, 100% Infill and 3 Parameters of course with original Prusament!
Happy Printing!!!