MINI Activated Carbon / Hepa filter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small air filter for 3D printing fumes
- Ocena
- 0 / 5
- Polubienia
- 46
- Pobrania
- 130
- Wydruki
- 0
- Wyświetlenia
- 2445
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Small filter with activated carbon and HEPA.
I already use Nevermore in my enclosure, without space for another, so i desinged a simple filter to help out with ABS fumes.
My version uses 6x3 magnets. 3 to mount to the frame, 2 are optional for the tray - if your printer is calibrated you will not need them.
I also added a version without magnet holes and another version with holes for heatinserts for different mount possibiltys.
What you need :
2x 40x10 fan, preferably Sunon MagLev or similiar.
8x M3x 12/14 screws to mount the fans
Activated Carbon - preferably Nevermore
6x3 magnets
HEPA filter - you will only need to cut some of it.
Print : Supports - Yes
LH - doesnt matter
Material - preferably ABS as it fits perfectly when printed with it.
Installation :
Can be seen in the pictures, except, make sure that the fan next to the activated carbon blows towards it and on the other side turn the fan so it sucks the air.
Better to filter anything, than filter nothing.