1 / 4
Magnetic Snapping Factorio Transport Belt (8x3mm) - "5mm Magnets" — zdjęcie 1
1 / 4

Magnetic Snapping Factorio Transport Belt (8x3mm) - "5mm Magnets"

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Model by @TheSameNameTwice. I just added Slotting for 5mm (actually 4.65mm) Magnet cubes bought from amazon.

Ocena
0 / 5
Polubienia
22
Pobrania
49
Wydruki
0
Wyświetlenia
892
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
GNU General Public License v2.0

Model by @TheSameNameTwice and slightly adjusted by me, so they connect together on nonmagnetic surfaces. 

They still stick to magnetic surfaces like fridges or the power supply of a prusa mk3 :)

 

Magnet Size?

The fitment of the square holes is adjusted to the “5mm” cube magnets (actually 4.65 mm) I bought, so no glue is needed to hold them in. I added a total clearance of 0.07mm to work nicely with my settings.

Keep in mind that material and print settings highly effect friction-fitment.
I printed using PLA at 210°C on a Mk3s+

Test your spacing using the included “MagnetFitment_TestCube.stl”.

 

Different Size Magnets?

To be able to modify the holes yourself, I added the Blender file. The cutouts are created using boolean modifiers, so adjusting the hole size should be fairly easy. 

I can add alternative versions if you give me the size of your magnets as precisely as possible.

 

Magnet Polarity?

I recommend magnet polarity as shown here to snap together nicely

 

Inserted a magnet the wrong way?

You will probably need to destroy the part partially by breaking one of the outer walls of a belt. They are pretty thin to reduce distance between magnets.
Alternatively, drilling a small hole from the top and pushing it out using a vice and a nail, for example, might be a mostly nondestructive way of removing it, only requiring to fill the hole.

Tagi