Voron 0.2 V0.2 "meshed" Skirt Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the original Voron V0.2 Skirt Set to be printed with a finer mesh instead of the "larger" hex openings.
- Ocena
- 5 / 5
- Polubienia
- 78
- Pobrania
- 795
- Wydruki
- 9
- Wyświetlenia
- 3469
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This Voron V0.2 Skirt Remix has a solid 0.6mm bottom layer that is intended to be printed with a higher infill and no top and bottom layers.
For printing make sure you add a height range modifier at 0.6mm. Up to this height there should be no top and no bottom layers to allow airflow. (See attached screenshot.) Choose whatever your heart desires as infill and see what infill density looks the best to you :)
You may also add a color change “M600” right above 0.6mm (i.e. at 0.8mm height if you print with 0.2mm layers) to spice things up a bit.
---
There is also a one-piece side skirt that will look way better as gap between the two side skirt pieces is quite pronounces. You can find it in my Models.
---
Please share a Make if you print one of these and as always: Enjoy!