Drawer underdesk for Ikea Bekant

This is a remix of three different very great designs - Thanks to @Jerrari, @h3artl3ss362_24751 and @celta

The drawer is designed to fit under the BEKANT table, add extra storage space while still providing an mounting point for the mesh.

Check first if you have a clearance of at least 23cm from the metal frame to the front edge of the table top.

Print hints:

• printed with 0.4 nozzle at 0.3mm layer height 
• drawer looks better with 0.2mm layer height
• no supports needed
• for more contrast on the label you can change color during print

Material

• 4x Magnets 10x5x2mm or 10x2mm for automatic closing (optional)
• 4x (up to 8) Wood screws countersunk M4x13mm max! longer screws might come through the top surface of the desk plat! 
• 3x M3 bolts and M3x8mm nuts

Mounting hints

• insert the nuts in the rail before mounting it on the table
• put in the magnets only a bit to test polarity - in case you put it in wrongly you can use the holes on the bottom to get them out again